S1100P-8G-1TS is a full gigabit enterprise level high performance non network management PoE switch independently developed by hasivo. Ports 1-8 support PoE power supply of ieee802.3af/at standard. As PoE power supply equipment, it can automatically detect and identify the power receiving equipment that meets the standard and supply power to it through network cable. It is suitable for hotels, campuses, dormitories and enterprises to set up an economical and efficient PoE network.
● Provide 8*10 / 100 / 1000m PoE RJ45 adaptive ports, all of which can realize line speed forwarding.
● Provide 1 gigabit RJ45+1 SFP uplink ports for high-speed uplink transmission.
●Each port supports MDI / mdix auto flip and duplex / rate self negotiation.
● Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
PoE power supply function
● According to IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 120W, the maximum PoE output power single port is 30W.
● Automatic identification of PoE equipment for power supply without damaging non PoE equipment.
Three working modes
● N -- standard switching mode: all ports communicate freely, suitable for common data transmission environment.
● V - port isolation mode: the downlink ports are isolated from each other, which is suitable for the use scenarios of connecting wireless AP, suppressing network storm and improving network performance.
● C -- flow control mode: port flow balance control, prevent big data flow packet loss, ensure the efficient and stable operation of user network.
The equipment is stable and reliable
● Hasivo independent research and development of power supply, high redundancy design, to provide long-term stable PoE power output.
● The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable.
Easy to use
● Plug and play.
● Dynamic LED indicator provides simple working status prompt and troubleshooting.
Complete set of accessories
By default, the switch is equipped with an AC power cord, a manual, a warranty card and optional rack lug.
Full Gigabit 8+1 PoE Switch
8*10/100/1000Base-TX PoE port(Data/Power)
1*10/100/1000Base-TX Uplink RJ45 port (Data)
1-8 port supports PoE（optional first port outputs HiPoE_60W）
C:(Flow Control mode)(specific port refers to user manual)
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-X
Store and Forward(full wirespeed)
10BASE-T ： Cat3,4,5 UTP(≤250 meter)
100BASE-TX ： Cat5 or later UTP(150 meter)
1000BASE-TX ： Cat6 or later UTP(150 meter)
1000BASE-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m)
Default 1/2(+)，3/6(-)；Optional order 4/5(+)，7/8(-)
Single port power
Average 15.4W；MAX 30W
Total power/Input voltage
MAX120W （DC:52V 2.5A）
Standby Power Consumption：≤8W；
P:Power LED(optional over-power LED)
Uplink:(Link LED=10/100M Link、1000M=Gigabit Link)
Port:(Orange=PoE LED+Green=Link LED)
External power DC:52V 2.5A
-10～+55°C；5%～90% RH Non coagulation
-40～+75°C；5%～95% RH Non coagulation
Product size/Packing size（L*W*H）
Desktop (optional external wall hanger parts)
Lightning protection level
CE mark, commercial；CE/LVD EN60950； FCC Part 15 Class B；RoHS；